English
Playlist
EA1276 simulates the main unit as iPod. Therefore, it can support all the playlists in iPod.
Note:
Please refer Acceptable playlist for more information.
How to create playlist
A playlist must be created in iPod prior to connection to the main unit. The main unit cannot be used to create a playlist. Please consult iPod Users Manual for playlist creation.
Changing playlist
Playback will start from the fi rst song of the selected playlist when next/previous playlist function is performed.
Smart playlist
EA1276 might not play updated songs of “Smart Playlist” properly after connection. It only plays the list set during connection.
Acceptable playlist
EA1276 can support all playlists that previously loaded into iPod before connection. However,
When iPod is connected to EA1276 and main unit, main unit will search for available playlist.
7. USABLE iPod MODELS
iPod 4th Generation (Software Version 3.1 or higher) iPod mini (Software Version 1.4 or higher)
iPod photo (Software Version 1.2 or higher, it does not apply to picture display) iPod nano (Software Version 1.0 or higher, it does not apply to picture display) iPod video
8.CHANGING MODE FROM iPod TO OTHER
If the main unit source button is continuously pressed, the main unit will change from iPod mode to other mode (depending on connections and system installed). iPod playback is temporarily paused.
iPod setting and play position is kept as long as iPod is still connected during this period.
9. ERROR DISPLAYS
Error Display | Reason | Corrective Measure |
ERROR 1 | Communication error. | Change mode of main unit to others and change back |
| to iPod or disconnect/reconnect iPod. |
8
