To disarm the security system, turn the ignition to the ON posi- tion. Press and release the Valet switch within 10 seconds. The DRW-35status LED will stop flashing and

the vehicle should start. If the vehicle does not start, you may have waited too long; turn the ignition off and repeat the process.

Location of Valet Button_________________________________

audible mode

To temporarily turn on the arm or disarm horn honk(s), simply

press for less than one second before arming or disarming, and the confirmation honk(s) will be present for that one opera- tion only.

valet mode

You can prevent your system from automatically activating the Failsafe® Starter Kill (optional, not included) and locking the doors by using Valet® Mode. This is very useful when washing the vehicle or having it serviced. In Valet® Mode, the starter kill cannot be activated, even with the transmitter, but all conve- nience functions (door locks, trunk release, etc.) will continue to work normally.

To enter or exit Valet® Mode:

8

© 2 0 0 6 d i r e c t e d e l e c t r o n i c s , i n c .

Page 11
Image 11
Clarion K20 manual Audible mode, Valet mode