English

8. WIRING CONNECTIONS

Connect the unit as follows.

Notes:

*1 Connect the cable to the terminal of equipment (center unit) that is connected by connection cables (CeNET cable) with the L-shaped terminals.

*2 Connection requires a CCA-389 conversion cord (RCA3P → mini DIN8P) which is sold separately.

*3 If you are connecting an antenna other than a 4 system diversity antenna, connect it to the MAIN terminal on the far right.

*4 Connect the terminal to the lead wire on the lamp side of the parking brake lamp switch. After connection, apply the parking brake, then check that the TV displays an image.

•If the PKB cable is not connected to the side brake, some units may not operate.

For connection of the Clarion CD changer (sold separately) for CeNET use. For connection of the rear seat monitor (sold separately).

For connection of the monitor (such as the Clarion VRX756VD, sold separately).

For connection of a video appliance (∗ 2) such as a handy camera (sold separately).

For connection of a Clarion CCD camera (sold separately).

*For connection of VRX756VD, connect the CCD camera to the NAVI/CCD terminal of VRX756VD.

Antenna main (MAIN) terminal

This unit (TTX754)

Supplied CeNET cable (∗ 1)

For connection (∗ 3) of a Clarion antenna such as ZCP-104 (sold separately).

Terminal (∗ 4) for connection to parking brake.

Supplied PKB cable

To parking brake

Main unit (such as the Clarion VRX756VD)

Supplied RCA video cable (∗ 1)

NAVI/CCD terminal.

8 TTX754

280-8285-00