R
EAR
C
ONTROLS AND
C
ONNECTOR
L
OCATIONS
:
O
PERATION
D
ESCRIPTIONS
:
When using this monitor in a 110Vac home environment. Plug the monitor into a
110Vac wall socket with the supplied AC power cable. Turn the rear AC Power
switch to the ON position. Press the front panel’s power button to power the
monitor. The monitor remembers the last input source selected and restarts using
that input. The initial factory default setting is the RGB input.
NOTE: The LED will be green under normal signal input. If no input signal is
detected the monitor will display a flashing error message for that
particular source. The LED will turn orange upon entering the power
saving mode after five seconds.
Choose the proper input source by pressing the Input Select Button on the front of
the monitor.
NOTE: In some cases, if the RGB, Video, or S-Video signal is low, the LED will
turn orange and enter a power saver mode after five seconds. This may
happen if you are viewing a TV station with a very weak signal. Press
the Power button on the front of the monitor to exit the power saver
mode.
3
OperationOWNER’S MANUAL
qVGAInput Connector
wS-Video Input Connector
eComposite Video Input
rRS232 Port (Not Available)
tUSB Input Connector
yDC Input Connector +12Vdc
uPower Switch 110Vac 50-60 Hz.
iAC Input Connector 110Vac
50-60 Hz.
oL/R Audio Input Connectors