VMA6491 6.4Ó TFT LCD Monitor

PRECAUTIONS:

This monitor is intended for use in DC 12V, negative ground vehicles.

Do not operate the monitor in ways other than described in this guide. Doing so may cause damage and void the warranty.

Be careful not to run down the car’s battery while using a multimedia system with the engine stopped. Doing so may damage the vehicle’s battery or the multimedia system.

Do not disassemble or modify the monitor. Doing so may damage it and void the warranty.

Keep moisture away from the set. Water and humidity may damage the inter- nal circuitry.

Do not let the monitor become overheated. If the temperature inside the vehi- cle is high or the monitor has been exposed to direct sunlight, lower the moni- tor’s temperature before use. (The liquid crystal panel operates within a tem- perature range of 30 – 113 degrees F).

In extremely cold temperatures, the movement of the picture may slow and the picture may become dark. The monitor will work normally once the tempera- ture increases to its normal operation range.

Small black or shiny dots may be seen inside the liquid crystal panel. These are normal when manufacturing liquid crystal products.

DESCRIPTION OF BUTTON AND CONNECTORS:

DESCRIPTION BUTTONS

1

2

3

Power Indicator LED

4 Video IN RCA

Remote Sensor

5 2-Pin Molex Power Connector

Brightness Controls

6 IR Serial Remote OUT

2

Page 3
Image 3
Clarion owner manual VMA6491 6.4Ó TFT LCD Monitor