Clarion WH 105 owner manual Installation, Precautions, Wiring

INSTALLATION

Precautions

Do not allow liquids or foreign objects to enter the WH105 RF Transmitter or Headphones.

If any unit should become wet, turn off all power and let your authorzied Clarion Dealer clean or service the equipment.

DO NOT ATTEMPT TO OPEN OR SERVICE THE RF TRANSMITTER OR HEADPHONES. THE INTERNAL PARTS ARE NOT USER-SERVICEABLE. DOING SO WILL VOID THE WARRANTY.

Do not drop or excessively jar the WH105 headpones.

Do not use liquid cleaners on any surfaces. Only use a soft (cotton or other non-static) cloth to wipe off fingerprints.

Do not subject the unit to direct sunlight or an extremely hot environment (e.g., closed windows on a hot summer day, direct path of heater vent, etc.)

Avoid using the products under the following contitions:

-After extended parking on an extremely hot or cold day

-Near strong magnetic fields

-In an environment with excessive humidity, dust, or vibration (e.g., off-road travel, etc.)

Wiring

This unit operates on an automotive 12-volt negative ground power source and requires additional mobile audio and video components for proper operation.

Before installation, disconnect the (-) negative lead from the vehcile's battery.

Attach the RF Transmitter to a location near your A/V Source with the provided adhesive tape.

Connect the power and ground wire connectors to the 12Vdc input. Connect black (-) wire to ground of the vehicle, and red (+) wire to an accessory 12Vdc power source.

Connect the audio input to a low-level output. With this connection, only the volume control on the earphones needs to be adjusted to control volume level.

6