Clarion XA311 Tape Operation, Basic Operation Adjusting the fader, Switching the Display

Basic Operation

Adjusting the fader

1.Press A-M button 4 and select “FAD”.

2.Turning the Rotary knob 3 clockwise emphasizes the sound from the front speak- ers; turning it counterclockwise emphasizes the sound from the rear speakers.

*The factory default setting is “0”. (Adjustment range: F9 to R9)

3.When the adjustment is complete, press A-M button 4 several times until the function mode is reached.

Switching the Display

While pressing the BAND button 6, press the DISP button $ to enter the clock display mode. Main display ➜ Clock display ➜ Main display

Setting the Clock

1)While pressing the BAND button 6, press the DISP button $ to enter the clock display mode.

2)While pressing the BAND button 6, press and hold the DISP button $ for 2 seconds or more. This enables the clock editing mode.

*The editable fields will be indicated when the dis- play flashes.

3)To move between the hour and minute fields,

use the Up (hour) and Down (minute) buttons

1.

4)To store the clock setting, press the BAND button 6.

Notes:

•If you select another operation mode before complet- ing the above procedure, the clock setting operation will be canceled.

•Removing the vehicle’s battery for a check or repair will cause the clock to reset to 1:00. Set the clock again if this happens.

Tape Operation

Loading Tapes

Insert the cassette tape into the Cassette inser- tion slot with the side on which the tape is exposed facing the right. Playback starts auto- matically.

*When the end of the cassette tape is reached, the auto reverse mechanism is activated and the other side of the tape begins playing automatically.

Note:

•Fully insert the cassette tape into the cassette inser- tion slot.

Listening to a tape which is already loaded

Press the FUNC button 5 to select the tape mode. Playback begins automatically.

Ejecting Cassette Tapes

Press the Eject button 9. The cassette tape is ejected.

*The radio mode is selected automatically 4 seconds after ejecting the tape.

Fast-Forwarding and Rewinding

Use the FF button @ and REW buttons 0.

: Press this to fast-forward the tape. : Press this to rewind the tape.

*It is possible to listen to the radio during fast-forward, rewind or search operations.

Switching to the Other Side of the Tape

Press the PROG button ! both the FF button

@and REW button 0 together at the same time. Playback is switched automatically to the other side of the cassette tape.

XA311 7