Feature Set-up
Clarity Power Technology
With the Clarity Power feature, the high fre- quency sounds are amplified more than the low frequency sounds so words are not just louder, but clearer and easier to understand.
BOOST Clarity Power On/Off
The C430 has a BOOST CLARITY POWER button that controls the loudness of the receiver. Once the BOOST button is pressed, an extra level of amplification is added over the entire range of the volume control.
The TALK button will light ORANGE to indi- cate the CLARITY POWER feature is activated.
WARNING: When the TALK button is lit ORANGE volume may be at a high level. To protect hearing, lower the volume control to minimum before using.
Volume Control
The dial controls the level of volume the hand- set and headset receive. The volume dial provides up to 15 dB of volume before the CLARITY POWER button is activated. Once the CLARITY POWER button is pressed, the Clarity 430 will provide up to 30 dB of gain.
Handset Ringer
Set the switch marked Ringer On/Off located on the side of the handset. The ringer switch must be set to ON for the handset to ring.
NOTE: If both handset and base ringer’s are set to OFF, the visual ringer will flash to indi- cate there is an incoming call.
TELEPHONE BASE
RINGER |
|
OFF | ON |
|
VOLUME
RING
STYLE
Diagram D: Telephone Base
BOOST ON/OFF Switch
This switch will disable the reset feature of the BOOST Clarity Power button as follows:
ON – When the Boost ON/OFF switch is set to “ON”, the Boost function will be ON every time a call starts, and will default to ON every time the phone hangs up. During a call, the BOOST Clarity Power button can toggle the Clarity Power ON or OFF accord- ing to the user’s needs.
OFF – When the Boost ON/OFF switch is set to “OFF”, the Boost function (Clarity Power) will be OFF every time a call starts, and the user will need to press the BOOST Clarity
14
