![](/images/new-backgrounds/1256952/25695233x1.webp)
Telephone Operations
E
may be used when it is necessary to dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. Press the RD/P button at the required point during the memory storage process to program a pause.
LCD Display Screen
The LCD located on the back of the phone will display the number you are dialing and with Caller ID service displays information about the call before you answer. The display also functions as call timer when the handset is off hook or on a call.
Lighted Key Pad
The key pad will light for fifteen (15) seconds after removing the handset from the base. To reactivate the feature while in standby, press the TALK or the MEM button. To activate while the phone is in use, press any key.
Base Lights
POWER ON – Handset is on a call.
IN USE/ CHARGING ON – When handset is in the base charging, the LED will shine RED when the handset is on a call the LED will shine GREEN.
Page/Handset Locator
To send a page signal from the base to the handset, press the PAGE button located on the base of the telephone. A series of rings will sound from the handset.
To locate the handset if it is away from the base, press and hold the PAGE button for approximately five (5) seconds. A series of rings will sound. Return the handset to the base or press the TALK button to cancel the page.
Channel Operation
The Clarity 430 cordless telephone auto- matically searches and selects the clearest of 40 channels when it is being used. If interference develops on the line, pressing this button will move to another channel.
Security Code
The security code prevents your cordless phone conversations from being accessed by a phone on a different line. Once the handset battery is fully charged, the handset will automatically select the code from over 65,000 different combinations. The code is changed every time the handset is placed in the cradle.
If you have trouble with placing or receiving calls, a lost security code may be the cause of the problem. When this occurs, the hand- set can no longer communicate with the base. Reset by placing the handset on the base for
N G L I S H
17