INSTALLATION
Warning: To prevent electrical shock, always remove the telephone line cord from the wall jack before removing the cord from the telephone. Never leave the line cord connected to the wall jack if it is not also connected to the telephone.
Select a Location
•This unit requires a modular phone jack.
•The unit should be located in an area where it is easy to see the lighted ringer.
•The unit can be used as a desk top phone or a wall mount phone.
Connecting the Clarity C1000 Phone
To install as a Desk Unit:
•Plug one end of the telephone line cord (long, flat) into the back of the Clarity telephone.
•Plug the other end of the telephone line cord into the wall jack.
•Plug one end of the handset cord (coiled) into the bottom of the handset.
•Plug the other end of the handset cord into the jack located on the left edge of the Clarity telephone.
•Place the handset in the cradle of the Clarity telephone.
•Avoid placing the unit where it will be exposed to excessive heat or humidity.
Flat cord here
Note: If you are plugging the phone into an older
Coiled cord here
signal program redial flashhold
abc | def | help |
ghi jkl mno mute
pgrs tuv wxyz boost
oper
C1000TM with Clarity® PowerTM
