Clarity C1000 manual Programming Frequently-Dialed Numbers, To Dial Programmed Numbers

TELEPHONE OPERATIONS

5.Press the “PROGRAM” button again.

6.Select the appropriate memory storage button. Press and release this button.

7.Place handset back into cradle.

8.Repeat steps 3 through 7 for all other memory storage locations.

signal program redial flash hold

Programming Frequently-Dialed Numbers

To Dial Programmed Numbers:

1.Pick up the handset and listen for a dial tone.

2.Press the appropriate Memory Storage Button.

3.The number will be dialed automatically.

Change A Stored Number

Replace a stored number by programming a new number its place.

Important: The HELP BUTTON is not pre-programmed for 911. Once program- ming is completed select the appropriate sticker from the sticker set provided and place on the red button.

Programming Note: During the programming sequence the dial tone MAY NOT break and in some instances an operator intercept may come on the line. This is normal. Continue with the programming sequence to completion.

Note: You can program a pause into the dialing sequence if necessary. Since there is not a pause button on the telephone, the redial button serves this purpose dur- ing programming. Programming in a pause will cause the phone to wait 3 seconds before dialing any more numbers. For Example: Pressing a memory button that has 9 (pause) 555-1212 programmed into it will dial the number 9, then wait 3 seconds and dial 555-1212. In most cases, you will not need to use a pause. You can store up to 16 digits and the pause function counts as 1 of those digits.

17