CHAPTER 7
IN CASE OF DIFFICULTY
If any problem should occur during operation of your RC, review the list below.
Should the difficulty persist, contact AMERIPHONE or your authorized dealer before sending the phone for service.
| SYMPTOM | CAUSE AND REMEDY | ||
|
|
|
|
|
| No dial tone | – Check all phone line connections. | ||
| No power | – Check power connection. |
|
|
| Does not dial out | – Check all phone line connections and power | ||
|
| connection. | ||
|
| – Change to pulse dialing and try again. | ||
| Does not dial memory number | – No number programmed in memory. |
| |
| Remote Transmitter does not work | – Check or replace battery. |
| |
|
| – Check channel settings. | ||
|
| – Make sure no part of the RC | ||
|
| system is on or near metal surfaces or electrical | ||
|
| equipment. | ||
– Make sure the ringer is not set to "Off" position.
– Turn on Scan function.
– Program Scan rate to a slower/faster setting. (Dialogue RC200 only.)
– Avoid speaking at the same time as the other party. Take turns.
SENSITIVITY ADJUSTMENT
YOU MUST CONTACT AMERIPHONE BEFORE MAKING THE FOLLOWING ADJUSTMENT:
| Callers can’t hear your voice when |
| – Turn HEADSET MIC GAIN adjustment, located |
|
|
|
| ||
| using the optional headset with inte- |
| on bottom of unit, clockwise to increase |
|
| grated microphone |
| sensitivity, counterclockwise to decrease. |
|
|
|
|
|
|
12
