28
Phone Will Not Hold Charge
• Make sure the charging contacts on the handset and base
are free of dust and dirt.
• Clean the battery contact with a cloth moistened with
alcohol.
• Make sure CHARGE LED on the base is lit when the
handset is in the cradle. If necessary, replace the handset
batteries. (See Battery Information.)
Difculty in Placing or Receiving Calls
• Check the visual ringer and/or other buttons for different
blinking lighting patterns - see above examples.
• Make sure you have selected the correct dialing mode,
tone or pulse.
• Disconnect the base for 5-10 seconds, then reconnect.
Place the handset back on the base and reinsert the AC
adapter.
• Make sure the handset batteries are fully charged.
Unable To Access Automated Systems
Automated systems used by banks, long distance voicemail
and other applications require that a phone be set to TONE
dialing. Check the switch on the bottom of the phone
labeled TONE / PULSE and set to TONE. This will enable
the phone to be compatible with these automated systems.
Poor Audio Quality
The base may be too close to electrical appliances,
reinforced concrete walls or metal door frames. Place the
base away from any electrical appliances.
Troubleshooting
XLC2