![](/images/new-backgrounds/1217949/2179497x1.webp)
4 |
|
| |
|
|
How to Use Digital-1
Operating Intructions:
❏Step 1
Plug the earphone into the earphone jack. The earphone cable also acts as the receiver antenna. Extend the cable fully for the best reception and least interference.
❑Step 2
Turn on the receiver by rotating the volume wheel. The red power LED will light up. This indicates that the receiver is ON and the batteries are properly charged.
WARNING!
To avoid harm to ears, keep all receivers OFF until the transmitter is operating at full power. Keep volume setting at low to
Technical Support: 1 (219)