ClearOne comm Battery manual Tuning, Channel Selection

6 Digital-1 User’s Guide

Tuning

Channel Selection

The Digital-1 receiver is digitally tuned. Once a channel is selected, no further adjustments are necessary. The factory preset for the Digital-1 receiver is channel 19 (72.95 MHz).

The step-by-step instructions and diagrams below and on the facing page show you how to change the receiver’s preset. See page 8 for frequencies corresponding to other channels.

❑Step 1

Remove the battery cover from the back of the receiver.

❑Step 2

Remove the two Phillips case screws and remove the back panel.

Technical Support: 1 (219) 929-4127