ClearOne comm Flexible Camera user manual Troubleshooting, Appendix, Specifications

12 Flexible Camera Series — Troubleshooting

Troubleshooting

Problem	Suggestion
TV does not have an S-video	Use the S-video to composite adapter to convert
input.	the S-video signal to a composite signal for your
	TV or VCR.
There is no video on TV	Ensure that the camera,TV and VCR are plugged
monitor when connected to	into power supplies and turned on.
a VCR.
	Ensure the camera is properly connected to the
	VCR.The yellow plug on the camera should
	connect to the video in jack on the VCR.
	Make sure the TV is on the correct channel for
	video (channel 3 or 4). Consult your TV user
	manual.
How do you connect the	Use an S-video to USB adapter (recommended)
camera to a computer?	or install a video card in your computer (not
	supported).

Flexible Camera Series — Appendix 13

Appendix

Specifications

Image Pick-up Device	S/N Ratio
1/4" CCD (6.35 mm)	6 dB: Condition: AGC off, weight on
TV System	Minimum Illumination
NTSC, PAL	IDCam, StudentCam, TeachCam
Total Pixels	1.5 lux at F2.0
IDCam, StudentCam, TeachCam	Minimum Illumination
NTSC and PAL: 410 K	FlexCam
Total Pixels	3 lux at F2.0
FlexCam	White Balance
NTSC: 266 K, PAL: 315 K	Auto
Number of Effective Pixels	Iris
IDCam, StudentCam, TeachCam	Electronic
NTSC: 768(H) x 492(V)	Gain Control
PAL: 752(H) x 512(V)
	Auto
Number of Effective Pixels	Sync. System
FlexCam
	Internal only
NTSC: 512(H) x 492(V)
PAL: 512(H) x 582	Power Supply
Number of Scanned Lines	12 VDC
NTSC: 525 lines	Operating Temperature
PAL: 625 lines	14° F to 122° F (-10° C to 50° C)

Frames per Second

NTSC: 30 fps

PAL: 25 fps

Resolution

IDCam, StudentCam, TeachCam

Horizontal

NTSC, PAL: Minimum 480 TVL (center area) Vertical

NTSC, PAL: Minimum 480 TVL (center area),

Resolution

FlexCam

Horizontal

NTSC, PAL: Minimum 330 TVL (center area) Vertical

NTSC, PAL: Minimum 330 TVL (center area),

Storage Temperature

-4° F to 140° F (-20° C to 60° C)

Indicator

Power On/Off LED

Audio

Integrated condenser microphone with preamplifier for line-level output

Connectors

1 S-video output

1 Line-level (audio) output

1 Power input

Part Numbers

FlexCam910-171-110

IDCam910-171-125

StudentCam 910-171-120

TeachCam 910-171-150

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760