TO MUTE DURING RINGING
1.Press the star (*) or the MUTE key to mute the ringer for the duration of the ringing.
> Note: This only mutes the current ring; the ringer is unmuted for subsequent calls.
TO ADJUST RINGER VOLUME
1.While the phone is ringing, press VOLUME UP or VOLUME DOWN.
2.While the phone is inactive, press VOLUME UP or VOLUME DOWN. The ringer melody plays once at the new level.
TO ADJUST LOUDSPEAKER VOLUME
1.Press the VOLUME UP key while on a call to increase volume.
2.Press the VOLUME DOWN key while on a call to decrease volume.
TO ACCESS YOUR HELP LINE
1.While in Standby mode, press and hold the 0 key for 2 seconds. This feature must be programmed before use.
TO STORE A NUMBER IN THE PHONEBOOK
1.Enter the number while the phone is in standby (inactive) mode.
2.Press and hold the PHONEBOOK key until the Phonebook and Program icons appear.
FIGURE 5 MAX IP phonebook and program icons
3.Assign a Phonebook location
4.Press PHONEBOOK again to save the entry. You hear a confirmation tone.
5.To exit Phonebook Edit mode before saving the entry, press CLEAR.
TO MAKE A CALL USING THE PHONEBOOK
1.Press the PHONEBOOK key.
2.Press the number
3.Press the ON/OFF key to dial the number.
TO MAKE AN OUTBOUND
1.Press the CONFERENCE key. The first party is put on hold and you are connected to a second line dial tone. OR press the HOLD key to place the current call on hold, then press ON/OFF key to obtain the second line.
2.Dial the second party’s phone number.
> Note: Stored numbers are not available for dialing a second party.
If you receive a busy signal or are routed to voicemail, then press the ON/OFF key to terminate the call and return to the first party.
3. Press the CONFERENCE key to join all three parties in a conference call.
MAX IP User’s Guide 3
