1 technical services: 800-283-5936
MaX™ ip respOnse pOint™Users Manual
UNPACk ANd SETUP
Unpacking information and setup instructions for your MaX ip response point product are found in the Quick start
guide and administrator’s guide.
kEyPAd FUNCTIONS
Button Name Function
hook
press to answer an incoming call.•
press to activate the phone and receive a dial-tone. •
press again to disconnect an active call. •
while on a second line, press this button to disconnect the call (for •
example: when listening to voicemail or a getting a busy signal during
a 3-way call).
response point press to access the response point directory automated receptionist.
redial press once to dial the last number called. •
press and hold for two seconds to enter program mode.•
Conference
press once during a call to place the first line on hold and receive a •
dial tone for a second line.
press again after the second call answers to connect a 3-way call.•
hold
places the active call on hold. if you are not on a 3-way call, press to •
toggle between lines.
if pressed during a 3-way call, both lines are placed on hold. a •
second press releases all the active line(s).
delete
press once to delete the last digit entered. •
press and hold to clear all digits. •
press to exit program mode.•
volume up
volume down
adjusts volume while on a call. •
when not on a call, pressing these buttons will adjust ringer volume.•
Mute
press once to mute the microphones during a call. press again to •
unmute.
if the phone is ringing, press once to mute the ringer for the inbound •
call.
FEATURES
the MaX ip™ response point™ is an audio conferencing solution for your response point system. Unpack, plug-in