ROOM DESIGN
Recommended microphone placement |
Ceiling Speakers | Ceiling Speakers |
Recommended |
Recommended |
ENGLISH
Basic Room Design for RAV
To ensure best microphone and loudspeaker placement (ceiling or
Microphones
Center mic pods on the table at an equal distance apart. Place the controller on the same table as the mics. In typical conferencing environments, participants should be seated
Mic
Ceiling-mount loudspeakers
For best performance, ceiling loudspeakers should be installed directly above the microphone pods. If you have a RAV 900 with three mic pods, install the ceiling loudspeakers above the first and third mic pods. The ceiling speakers must be set to 8 Ohms. Please refer to the Bose user manual for instructions.
Wall-mount loudspeakers
Place the left channel loudspeaker on the left side of the room and the right channel loudspeaker on the right. (Refer to the label on the back of each loudspeaker.) Make sure the back of each loudspeaker is parallel to the front wall.
For best controller performance
•Do not install the RAV mixer in a metal cabinet unless you are using the remote antenna accessory.
•Keep the mixer within line of sight of the controller, such as on the top of a credenza.
•Ensure antenna is connected to the back of the mixer and is pointed up.
•If installing the mixer in an equipment rack, make sure it is placed at or near the top of the rack.
For best audio performance
•Use the provided cables.
•Do not move microphones while on a call.
•Speak at a normal conversation level and direct your voice toward the microphones.
•Do not place microphones next to fans, projectors or computers.
RAV Quick Start Guide — Room Design
1