PROBLEMS

If it appears that your DVD-Video player is faulty, first consult this checklist. It may be that something simple has been overlooked.

Under no circumstances should you try to repair the player yourself; as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.

NO POWER

•Check if the power button on the front of the player is set to on.

•Check if power plug of the mains cord is properly connected.

•Check if there is power at the AC outlet by plugging in another appliance.

NO PICTURE

•Check if the TV is switched on.

•Select the correct AV input on the TV.

•Check the video connection or cable.

•Check if channel selector is set to AV on the TV. (See your TV manual for instructions).

NO AUDIO ON DIGITAL OUTPUT

•Check the digital connections

•Check the Digital Out menu to make sure that the digital output is correctly set.

•Check if the audio format of the selected audio language matches your unit capabilities.

THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL

•Aim the remote control directly at the sensor on the front of the player.

•Avoid all obstacles which may interfere with the signal path.

•Inspect or replace the batteries.

DISTORTED PICTURE

•Press the VIDEO button to select the correct video output mode.

•Check the disc for fingerprints and clean with soft cloth, wiping from center to edge.

•Sometimes a small amount of picture distortion may appear. This is not a malfunction.

•Ensure that ONLY one video output is connected.

•If connected through a VCR or other recording device, try connecting directly to the television (This may be a result of anti-piracy measures.)

NO COLOR IN PICTURE

•Check the video settings in the setup menu.

•The disc format is not according to the TV-set used (PAL/NTSC).

•Ensure DVD player is not connected through VCR.

PICTURE SWING

•Relocate the unit further away from possible interference or emission source (e.g. Radio, Power Amplifier, Radiator, powerful magnets, etc.).

NO SOUND

•Check audio connections.

•If using a Hi-Fi amplifier, try another sound source.

•Clean the disc.

•Check if the disc is defective by trying another disc

NO RETURN TO START-UP SCREEN WHEN DISC IS REMOVED

•Check to see if the program requires another disc to be loaded.

•Reset by unplugging the player from the power, then connect the power again.

FUNCTION DISTURBED

•The normal function of the product may be disturbed by external interference.

•Disconnect and reconnect the power cord (may be required to resume normal operation).

DISC CANNOT BE PLAYED

•Ensure disc is placed properly into the disc tray.

- 27 -