PHONE HANDSET SETTINGS
█Handset Name
This feature allows you to give each registered handset a name in order to easily recognize each handset if you have more than one registered to the base. To set the handset name:
1.Press 
under the word Menu on the screen to display the main menu list.
2.Press up 
or down 
to scroll to HS Settings and then press under the word Select.
3.Press up 
or down 
to scroll to Rename HS and then press under the word Select.
4.Enter the handset name (up to 9 characters) by using the keypad and then press under the word Save to confirm and exit. The handset name will be displayed above your handset number in standby mode.
Note: If you make a mistake while entering the name, press 
under the word Erase to correct it. Each time you press this key, the last character is deleted.
█Handset Reset
This function allows you to reset the handset settings for Alarm, Audio Setup, Ring Setup, Tone Setup, Language, HS Name, Auto Answer and Date & Time to the initial factory settings. To reset the handset:
1.Press 
under the word Menu on the screen to display the main menu list.
2.Press up 
or down 
to scroll to Default and then press
under the word Select. You will be prompted to enter the PIN.
3.Enter the PIN (the default PIN is 0000) and then press
under the word Select. If the PIN is validated, the display will show Confirm?.
4.Press 
under the word Select to confirm or press 
under the word Back to cancel and exit.
