ClearSounds A1600E operating instructions Base Desk/Table Mounting, Installing Batteries

Base Desk/Table Mounting

1.Plug the AC power adapter into the jack on the back of the base, then plug the AC adapter into a standard electrical outlet or surge protector.

Note: The adapter is required for the phone to work.

Installing Batteries

Three AAA re-chargeable Ni-MH batteries come with your phone. You must install the handset batteries before using your phone.

1.Remove the battery compartment cover by sliding it downwards.

2.Insert the new batteries. Be sure to observe battery polarity as imprinted on the inside of the compartment.

3.Replace the battery compartment cover by sliding upward until it clicks into place

Note: The batteries need to be replaced if they do not recover their full storage capacity after recharging. Check the battery icon on the LCD to see the battery charge level.

When replacing the batteries, always use good quality Ni-MH AAA re-chargeable batteries.

6 – ENGLISH