ClearSounds ANS3000 manual Remote Access Code

3.After you enter the PIN, the system will play the menu of commands. You can then follow the commands to operate.

1 - Main Menu

2 - Play New Messages

3 - Play All Messages

5 - Turn Machine On/Off

6 - Record Outgoing Message

0 - Delete All Messages

While listening to messages, you can press 1 to replay the current message, 2 to stop the current message, and 0 to delete the current message.

If you record a new outgoing message, press the or

to finish. The machine will play the outgoing message you recorded.

Reminder: Your answering machine must be turned ON in order to use remote access. Stop the message playback before hanging up the remote access call.

█Remote Access Code

The four-digit default PIN is ‘0000’. To change the PIN:

1.Press and hold the Repeat key to enter the set-up mode.

2.Press the Vol+ or Vol- key to adjust the first digit. You will see the digit display on the LED. Press and hold the Repeat key to confirm and then enter the second digit by pressing the Vol+ or Vol- key.

3.Press and hold the Repeat key to confirm and then enter the third digit by pressing the Vol+ or Vol- key.

4.Press and hold the Repeat key to confirm and then enter the fourth digit by pressing the Vol+ or Vol- key.

5.Press and hold the Repeat key until you hear a long been and the LED will return to idle mode.

14 – ENGLISH