ClearSounds ANS3000 manual Optional Battery, Bracket Installation

█OPTIONAL BATTERY

The ANS3000 utilizes non-volatile flash memory to store data such as the language selection, ringer number, playback speed, outgoing messages and recorded messages. This data will not be lost if the ANS3000 loses power. However, the Day setting is not stored and will need to be reset when power is restored.

If you choose to insert the optional 9 volt alkaline battery, you will be able to receive new messages for approximately 2 hours during a power outage, but you will not be able to access any of the other machine functions. Once power is restored, you will be able to listen to the new messages.

The battery compartment is located on the underside of the answering machine.

█BRACKET INSTALLATION

For wall mounting, insert the bracket to A. For desk/table mounting, you can slide the bracket into B for stabilization.

Wall Mounting

1.Install two self-tapping screws (not supplied) at a distance of 70 mm apart from each other on a horizontal line.

2.Insert the bracket to location A, shown in the figure below. The raised mounting pins line up with the keyhole slots on the unit. Once the holes are lined up, snap the bracket securely into place.

3.Holding the unit slightly above the mounting screws on the wall, push the unit against

8 – ENGLISH