Installation
1Unplug the handset cord from your telephone base. Insert this cord into the jack marked “HANDSET.”
2Plug one side of the short phone cord (included) into the jack marked “BASE.” Plug the other end into the telephone base.
3Set the Compatibility Switch to the “4” setting. This setting provides compatibility for most telephones
4Attach the AC Power Adapter to the IL95 (located on the upper left hand side of the unit) and plug the other end into a working electrical outlet.
5Pick up the handset. If you hear a dial tone, your IL95 Amplifier is installed properly.
6Be sure to register your product online at www.clearsounds.com.
If you do not hear a dial tone or the person you are calling cannot hear you, consult the telephone compatibility section.
