6.The current On/Off selection for the Sound Alarm

(r1=On/Off) will blink. Press Up or Down to select On or Off and then Press Set Alarm .

7.If you select On, the current pattern for the sound alarm (P1-P3) will blink (if selecting Off, skip to step 8).

Press Up or Down to select the desired sound pattern and then Press Set Alarm.

8.The current On/Off selection for the LED/Lamp Flashing

(F1=On/Off) will blink. Press Up or Down to select On or Off and then Press Set Alarm .

The alarm setting is now complete and will show the current time.

Please Note: At any point, you can press Return to save and exit.

SNOOZE KEY

When your clock alarm activates, you can temporarily turn it off using the Snooze key. The Snooze key will stop the alarm for 5 minutes. After 5 minutes, the alarm will activate again. You can continue to press the Snooze key for a total of 1 hour after which the alarm mode will be automatically switched off. The Snooze key is located on the top of the clock.

ALARM OFF KEY

When your clock alarm activates, it will continue for 5

minutes if no key is pressed. If you press Set Alarm ,

the alarm will turn off and it will reset to activate at the same time the next day.

14 – ENGLISH

Page 14
Image 14
ClearSounds SW200 manual Snooze KEY, Alarm OFF KEY