Clevo M730T, M729T, M728T manual Removing the Wireless LAN Module, Wireless LAN Module Removal

Removing the Wireless LAN Module

1.Turn off the computer, remove the battery (page 2 - 5) and the component bay cover (page 2 - 10).

2.The Wireless LAN module will be visible at point 1 on the mainboard.

3.Carefully disconnect cables 2 - 3 , then remove screw 4 from the module socket.

4.	The Wireless LAN module 5 will pop-up.
5.	Lift the Wireless LAN module (Figure 11d) up and off the computer.

Disassembly

Figure 11

Wireless LAN

Module Removal

a. Remove the cover.

b. Disconnect the cables and remove the screw.

a.

1

c.

5

b.

Note:

Only one model is pic- tured here, however the component loca- tions are the same for both models.

d.

4

3

2

c. The WLAN module will pop up.

d. Lift the WLAN module out.

Note: Make sure you reconnect the antenna cable to “1” + “2” socket (Figure b).



5. WLAN Module.

• 1 Screw

2.Disassembly

Removing the Wireless LAN Module 2 - 15