Programming Options

Programming options control your system's normal, operational set-up. Most options do not require additional parts, but some may require additional installation labor. This system's programming options are listed below, with the factory default settings in bold:

■12, 24, or 60 minute run time. Your system can be pro- grammed to allow the vehicle to run for 12, 24, or 60 min- utes when remote started or in Timer Mode.

■Parking lights flashing or constant. Your system can be pro- grammed to either flash or to turn on the parking lights con- stantly during the entire remote start operation.

■Passive Mode or Active Mode. In Passive Mode the Failsafe® Starter Kill will automatically activate 30 seconds after the ignition has been turned off.

■Ignition switch-controlled door-locking on or off. With this feature on, the doors will lock 3 seconds after the ignition key is turned on, and unlock when the ignition key is turned off.

■Passive Locking or Active Locking (doors lock only with the transmitter). With Passive Locking, the vehicle doors lock automatically 30 seconds after the ignition has been turned off. Passive Locking can only be selected when the system has been programmed for Passive Mode.

■The horn honk confirmations for locking and unlocking can be programmed on or off. In order for this feature to be pro- grammed on, the horn must be connected to the system.

18

© 2004 Directed Electronics, Inc.