✂
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
To lock using your remote
■To arm the system press 
for one second. The doors will lock (if con-
nected). The LED will begin to flash. The Failsafe® Starter Kill will prevent the vehicle’s starter from cranking if it has been installed. The ve- hicle’s horn (if connected) will honk and the parking lights will flash once to confirm arming of the system.
To unlock using your remote
■To disarm the system press 
for one second. The doors will unlock (if
connected). The Failsafe® Starter Kill will be deactivated and the vehicle’s horn (if connected) will honk twice and the parking lights will flash twice.
Disabling the Failsafe® Starter Kill without a transmitter
■Turn on the ignition. Press and release the Valet® switch within 10 sec-
onds. The LED will stop flashing and the vehicle should start. Be sure to check with the installer for the location of the Valet® switch.
To remote start the vehicle
■Press 
twice within 3 seconds. The parking lights will turn on (if con- nected) and the vehicle will start and run for the programmed amount
of time.
To enter or exit Valet® Mode
■Turn the ignition to the "ON" position. Turn the ignition back off. Press and release the Valet® switch within 10 seconds. The status LED will light steadily if you have entered Valet® Mode. To exit Valet® Mode, repeat the steps above. The LED will turn off when exiting Valet® Mode.
To activate Panic Mode
■Press and hold 
for 1.5 seconds.
To disable the remote start system
■To disable the remote start, move the shutdown toggle switch to the OFF position.
Location of Shutdown Switch______________________________
© 2004 Directed Electronics, Inc. | 25 |