5 HangingCabinet
CAUTION: Do not move or stand | PRECAUCIÓN: No mueva ni | MISE EN GARDE : Ne pas |
the unit upright until the back | coloque la unidad de pie hasta | déplacer ni redresser le meu- |
panel(s) (B) is nailed in place. | que el panel trasero (B) esté | ble avant que les panneaux |
| clavado en su lugar. | arrières (B) soient cloués en |
|
| place. |
(20)
51480
BP
6 SHELFTRACKOptionINSTALLATION OF HANG TRACK & STANDARDS
The Hang Track and Standards must be attached with screws to wall studs.
When using the Maximum Load Hang Track for installation,
the following weight load specifications apply:
•100 lbs. per laminate shelf
•50 lbs. per drawer
•Total weight per 40” Hang Track not to exceed 900 lbs. (Including the weight of each cabinet.)
•Total weight per 80” Hang Track not to exceed 1,900 lbs. (Including the weight of each cabinet.)
•Each standard should be secured with screws in all mounting holes.
Hang Track, Standards & Hardware sold separately. Use #12 x 2” pan head screw.
STUDS: Screw directly into studs.
CONCRETE: Drill 1/4” holes. Insert #12 wall anchors. Screw into place.
1 | 2 |
1. Locate the wall studs. Use a | 2. Hang the first Standard as |
level, then install the Hang Track to | shown, use a level, then attach the |
the studs with screws. | standard to the wall stud with |
| screws. |
3
Spacer Board
3.Use the spacer board and hang the second Standard from the Hang Track.
4
4.Hang the completed cabinet on the Standards. Make sure the hangers are "locked" into the slots on the Standards. Then attach the second Standard to the wall stud with screws as shown in Step 2.
8