D
E
Assembly Tools Required
Outils de Montage Nécessaires
Herramientas Necesarias
AB
F
G
Parts and Hardware
A. right side (1) | D. | assembly screw (16) | G. dowel hole plug (2) |
B. left side (1) | E. | cover cap (16) |
|
C. shelf (4) | F. | small wooden dowel (2) |
|
Parties et Matériel
A. right side (1) | D. | assembly screw (16) | G. dowel hole plug (2) |
B. left side (1) | E. | cover cap (16) |
|
C. shelf (4) | F. | small wooden dowel (2) |
|
C | Las Partes y el Hardware |
| |
| A. right side (1) | D. assembly screw (16) | G. dowel hole plug (2) |
| B. left side (1) | E. cover cap (16) |
|
| C. shelf (4) | F. small wooden dowel (2) |
|
|
|
|
|
C
Step 1
| C | 1 - Attach Right Side (A) to Shelves (C) with Assembly Screws. | |
|
| ||
|
|
| |
| A | Marcher 1 | |
| C | 1 - Attach Right Side (A) to Shelves (C) with Assembly Screws. | |
|
|
| |
C | unfinished edge | Dé un Paso 1 | |
1 - Attach Right Side (A) to Shelves (C) with Assembly Screws. | |||
| |||
| bord inachevé | ||
| la orilla inacabada |
|
unfinished edge bord inachevé
la orilla inacabada
Step 2
1 - Attach Left Side (B) to Shelves (C) with Assembly Screws.
B | 2 - Cover exposed screw heads with Cover Caps (E) |
|
Marcher 2
1 - Attach Left Side (B) to Shelves (C) with Assembly Screws.
2 - Recouvrez les têtes de vis exposées à l'aides des Capuchons (E)
Dé un Paso 2
1 - Attach Left Side (B) to Shelves (C) with Assembly Screws.
2 - Cubra las cabezas expuestas de los tornillos con los Capacetes suministrados (E)
OR | Step 3 |
|
1 - If stacking multiple units, insert Small Wooden Dowels (F) into holes in the top of each unit. If dowels are not used, insert Dowel Hole Plugs (G)
Marcher 3
1 - Dans le cas d'ensembles multiples, introduisez les Petites Chevilles (F) d'empilage dans les trous prévus en haut de chaque ensemble. Si vous n'utilisez pas les chevilles, obturez les trous à l'aide des Bouchons prévus (G)
Dé un Paso 3
1 - Si amontona unidades mútiples, inserte las Clavijas de Apilamiento (F) dentro de los agujeros que se encuentran en la parte superior de cada unidad. Si no se usan las clavijas de apilamiento, inserte los Tapones del Agujero de la Clavija (G).
