Clover Electronics DC534 instruction manual Specifications

the surface of the camera case is hot	provided AC adapter
The contrast on the screen is too weak	Adjust the contrast feature of the
	monitor. If the camera is exposed under
	too strong light, change the position
The image on the screen flickers	Does the camera face to directly to the
	sunlight or fluorescent light? Change the
	camera position
Picture rolls and jumps, scrambled	Improper V-hold control. Setting on your
picture	monitor
Picture smaller than screen	House current may be too low

SPECIFICATIONS

•	Image pickup device	1/3” Sony Super HAD CCD, 510H x 492V
•	Scanning system	525 lines, 2:1 interlace
•	Horizontal resolution	520 TV lines
•	Electronic Shutter speed	1/60 to 1/100,000 sec
•	Sync. System	Internal
•	S/N ratio	more than 48db (AGC off)
•	Gamma characteristics	0.45
•	Minimum illumination	0.1 Lux with LEDs- Off
•	Video output	Composite 1.0Vp-p @75 Ω
•	Lens	4.3mm fixed lens
•	Housing material	Die cast aluminum alloy
•	Dome material	Polycarbonate
•	Current consumption	250mA Max (LED On)
•	Power supply	DC 12V 500mA (Regulated)
•	Operating temperature	-10°C to 50°C
•	Dimensions	120 (W) x 120 D) x 72 (H) mm
•	Weight	1.2Lbs