Note:
▪Apply the provided AC Power supply only.
▪The total length of cable must not exceed 200’ including extension cable.
TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the service center.
Troubles | Remedies |
No video | Check the AC adapter and video cable |
| between the camera and a monitor |
The image on the screen is dark | Check the brightness control on the |
| monitor |
The image on the screen is dim | Check if the lens is stained. If dirty, |
| clean it with soft and clean cloth |
The camera is not working properly, and | Check if you have connected the |
the surface of the camera case is hot | provided AC adapter |
The contrast on the screen is too weak | Adjust the contrast feature of the |
| monitor. If the camera is exposed under |
| too strong light, change the position |
The image on the screen flickers | Does the camera face to directly to the |
| sunlight or fluorescent light? Change the |
| camera position |
Picture rolls and jumps, scrambled | Improper |
picture | monitor |
Picture smaller than screen | House current may be too low |
SPECIFICATIONS
• | Image sensor | 1/3” SONY Super HAD CCD |
• | Total pixels | 811(H) x 508(V) |
• | Effective Pixels | 768(H) x 494(V) |
• | Scanning system | 2:1 Interlace |
• | Synchronization | Internal/Line Lock |
• | O.S.D | Available |
