Clover Electronics HDC553 instruction manual

5.Loosen the locking screw⑧ with the provided hex-head wrench and turn the camera clockwise or counter-clockwise to upright images on the screen and turn it clockwise to secure.

6.If necessary, change the settings to get the best images depending on your application by using the button on the bottom of the camera.

-Get rid of the cap⑨ for the OSD button by turning counter-clockwise and then change the settings (refer to the included instruction manual for OSD).

-Turn the cap clockwise to secure after changing the settings.

7.Unfold the two IR illuminators⑩ to enlarge the IR range at night.

8.Put the sun-visor back to the camera and fix it with the screw.

9.Connect the one end of 100’ BNC cable (supplied) to the BNC (F) of 5’ cable attached to the camera and the other end (BNC) of cable to the video devices such as DVR, monitor/TV. Plug the provided AC power supply to the DC jack (red) on the end of 100’ cable.