SWR#
SWB#
Software Release Number
Software Build Number
Positive Watts Consumed
A read only indication of power consumed by the card from the frames +12V rail.
Negative Watts Consumed
A read only indication of power consumed by the card from the frames
Software Release Number
A read only indication of the software release number. A higher number is newer release of software.
Software Build Number
A read only indication of the software build number. Software build number is an internal indicator used by Cobalt engineers to differentiate different software builds.
Factory Default Settings
The factory default settings are as follows
1)The proc module is enabled, but all parameters are set to unity.
2)The Frame Sync is disabled, reference 1 or 2 must be chosen to enable the frame sync.
9032 Owner’s Manual • (V 2.0) | Page 15 of 24 |
