Operation
Operating Your Handset
Operation
•
Once the Cobra Bluetooth handset has been paired with a cell phone, incoming calls can be answered and outgoing calls can be made.
Operation
Operating Your Handset
Call Waiting
When a second call rings during an active call, it will be announced on the handset screen.
Standby
While waiting to receive or make a call, the handset will be in Standby mode.
Call Waiting Display
INCOMING CALL
To Answer the Waiting Call:
1. Press the Answer Function button. The waiting call |
Standby Mode
PAIRED TO
XXX
The upper part of the screen shows the Waiting For A Call icon and the cell phone signal strength.
The Function buttons (from left to right) will activate display of the Volume screen, the Menu screen, the Call Log screen and the Phonebook screen.
+1 555 566 1234
ANSWER IGNORE
will become active, the first call will be put on hold. |
VOL MENU LOG CONT
The Up and Down Arrow buttons will also adjust handset speaker volume directly while in Standby or during a call.
Incoming Call
When the active paired cell phone receives a call, the ring tone will sound and it will be announced on the handset screen.
Outgoing Call
Outgoing calls can be initiated in three ways:
■ By selecting a Phonebook entry. | |
■ | By selecting a Call Log entry. |
■ | By dialing the number using handset Function buttons. |
Incoming Call Display
INCOMING CALL
+1 555 566 1234
ANSWER IGNORE
Ringing
The call can be answered by pressing either the Answer Function button or the Green Phone button.
If the Ignore Function button is pressed, the call will not be accepted, but will be recorded in the Call Log.
Answered Call
Phonebook
After adding a number to your Phonebook, you can go to the Phonebook and select it from the available numbers to be dialed.
To access a number in the Phonebook, press the Menu Function button in Standby mode, then select the Phonebook mode to arrive at the screen shown.
Answered Call Display
CONNECTED
+1 555 566 1234
The Mute Function button will disable the microphone, but allow you to continue to hear the calling person.
To end the call and return to Standby mode, press either the End Function button or the Red Phone button.
Caller information like name and number of the incoming
Phonebook
Select and Dial a Number
1BILL CELL
2NATALIE
3NAT CELL
4BILL DESK
ADD NEW
EXIT
PG PG 
NEW EDIT
To Select and Dial a Number:
1.Use the Page Up and Page Down buttons to shift up and down the list of entries.
2.Use the Up and Down Arrow buttons to scroll the pointer at the left of the screen to the desired entry.
MUTEEND
caller will only be shown if it is available on your network and/or device.
3.Press the Green Phone button to call the number.
10 English
Nothing Comes Close to a Cobra® 11
