1 Driver Installation
1 Insert CD provided.
2 Double click "XXX" file and installation will start automatically.
3 Click "Complete" bottom in
4 Your Camera will be recognized as PC Cam or Mass Storage by your PC next time you connect it via the USB cable provided (see 4 SETUP on P.13).
Note: h ALWAYS install driver BEFORE connecting to your PC for the first time.
hTo use PC CAM function in any version of Windows*, you must install the correct driver provided.
hTo use MASS STORAGE function, driver is needed for Windows* 98 SE. No driver needed for Windows* ME, 2000, NT & XP.
hAlways set USB mode according to your need BEFORE connecting to PC. (See 3.9 PC Cam & 3.10 Mass Storage on P.13)
hBoth PC CAM and MASS STORAGE functions are supported by Windows* 98 SE and later versions of Windows*.
*Windows is a trademark of Microsoft Corp.
2 Preparation For Use
2.1 Loading Batteries
1Open the Battery Cover as shown
2Load 3 AAA batteries with correct polarity as indicated inside Battery Cover “+ - +”
2.2 Inserting a Memory Card
1Open the Battery Cover as shown
2Insert a SD card into the slot in the indicated direction
hContact pins first and label side facing LCD display 3 Press the card gently into the slot, it will “click” into place
4 To remove a memory card press gently on the edge of the card to eject