Cobra Electronics 25 NW specifications Ignition Noise Interference

Models: 25 NW

1 40
Download 40 pages 30.94 Kb
Page 7
Image 7
Ignition Noise Interference

Ignition Noise Interference

Use of a mobile receiver at low signal levels is normally limited by the presence of electrical noise. The primary source of noise in automobiles is from the alternator and ignition system. Typically, when signal level is adequate, the back- ground noise does not present a serious problem. Also, when extremely low level signals are being received, the transceiver may be operated with the vehicle’s engine turned off. The unit requires very little current and therefore will not signifi- cantly discharge the vehicle’s battery.

Even though the Cobra 25 NW has an automatic noise limiter, in some installations ignition interference may be high enough to make good communications impossible. Many possibilities exist and variations between vehicles require different solutions. Consult your COBRA dealer or a 2-way radio technician for help in locating the source of a severe noise.

7

Page 7
Image 7
Cobra Electronics 25 NW specifications Ignition Noise Interference