Nexus 21 Multi Control 13.2.2Fault - action, Speed and distance functions No reading, Error

MULTI CONTROL

13.2.2Fault - action

1.Speed and distance functions: No reading ( --- )

-C95 (COG) should be OFF, if no navigator is connected. For more information, see manual for NX2 Server.

Irregular values: Check the speed damping (SEA), (see 12.1.4).

2. Compass: No reading ( --- )

−C75 should be OFF, if no NMEA compass is connected.

−Make sure the (Auto DEV) routine is done correctly, (see 12.4.1)

−Make sure the transducer is not mounted upside down.

−The transducer cable should face down.

−Make sure transducer is aligned correctly, (see 12.4.4).

For more information, see manual for NX2 Server.

Irregular values: Check the compass damping (SEA), (see 12.3.12).

Make sure there are no ferrous items close to the transducer.

3. Wind: No reading ( --- )

−C76 should be OFF, if no NMEA wind is connected. For more information, see manual for NX2 Server.

13.2.3Error messages

The following error messages can appear on the display:

ERROR 2	Nexus Network is missing, check colour coded connections
ERROR 3	No data received within a given time.
ERROR 10	Range error caused by bad format e.g. 17° 70' East.
ERROR 11	Remote command that can not be performed.
ERROR 12	No response from, or missing navigator.
ERROR 13	Waypoint not defined.
ERROR 15	Functions not allowed in autopilot mode.
ERROR 16	Automatic deviation not possible due to NMEA compass selected.
ERROR 17	Automatic	deviation check failed. Turn not completed,
	error larger	than 1,5°.
ERROR 19	The boat probably hit a wave during turn. Error larger than 1,5°.

If other error messages than the above appears on the Multi Control instrument, contact your NX2 dealer.

55