MULTI CONTROL
12.6.6C75 (OFF CMP)
(OFF) = NX2 compass transducer. (On) = NMEA compass transducer.
If you want to use a NMEA transducer (connected to the NMEA input, you have to set C75 to On. The Server will then transmit this information on the Nexus Network to all connected instruments.
After you have changed this setting, you have to restart the system
12.6.7C76 (OFF WND)
(OFF) = NX2 wind transducer. (On) = NMEA wind transducer.
If you want to use a NMEA transducer (connected to the NMEA input, you have to set C76 to On. The Server will then transmit this information on the Nexus Network to all connected instruments.
After you have changed this setting, you have to restart the system
12.6.8C77 to C92
Contains 16 NMEA slots. (See 12.7.2)
12.6.9C93 (d4 NME)
Damping for NMEA OUT from Server.
Only compass heading (HT/HM) and boat speed through water (BSP) can be damped with this code.
d0 = 0.5 sec, d2 =1 sec, d3 = 2.5 sec, d4 = 5 sec, d5 = 10 sec, d6 = 20 sec, d7 = .40 sec, d8 = 80 sec and d9 = 160 sec.
12.6.10 C94 (OFF COG)
Select type of heading transducer, compass or navigator (COG), to be displayed as
When COG is available (NX2 or NMEA), and no compass transducer is connected, you can set C94 to (ON), COG will also be used to compute TWD (true wind direction)
12.6.11 C95 (OFF SOG)
Select speed transducer to be displayed as
(ON) = Speed Over Ground (SOG) from navigator. This will not affect wind calculation, see 12.6.12
12.6.12 C96 (REF BSP)
Select speed transducer (REF BSP) or Speed Over Ground (REF SOG) to be used for computing true wind speed and angle, VMG, True Wind Direction and trip log, total log and distance.
(REF BSP) = Boat speed through the water from log transducer. (REF SOG) = Speed Over Ground (SOG) from navigator.
48
