MULTI CONTROL
7.3Remote Control (REM)
The NX2 Multi Control can be used to remote control other digital
NX2 instruments.
All digital NX2 instruments has their unique ID number on the Nexus Network. At power up the ID numbers are displayed for a short time.
The instrument to the right has ID number 16 (version number is 2.0)
Note the ID numbers for the instrument you want to remote control.
Press SET and the selected ID number is flashing.
Select the ID number for the instrument you want to control with PLUS and MINUS as required. Press SET to start remote control. Four push button symbols are displayed to tell you are in remote mode. The display of the instrument you selected will flash once and then the PAGE symbol of that instrument will continue to flash to tell it is remote controlled.
Now you can use the four push buttons:
To exit the remote control page, press CLEAR:
24
