Cobra Electronics CP-705 operating instructions Hearing AID Compatibility

DIGITAL SECURITY CODING

Your Cobra INTENNA features digital security coding (in accordance with FCC regulations) to reduce the chance of interference from your neighbors’ cordless phones. These inaudible, electronic codes are transmitted automatically by your phone to establish a secure link between your cordless handset and base.

DISPLAY WINDOW

Use the back of card on the handset (marked"DIGITAL CODING") to write your phone number. (Use the tip of a paper clip to pry off the protective plastic cover.)

FLASH

This feature briefly interrupts the phone line so that you may access some of the advanced features — like “Call Waiting” and “Three-Way Calling” — that may be offered at extra cost by your local telephone company. Press and release the FLASH button on the handset to answer a second phone call or place a conference call if you subscribe to these services.

HEARING AID COMPATIBILITY

Your cordless telephone handset is compatible with inductively coupled hearing aids.

INTENNA SYSTEM

The revolutionary, patented INTENNA hidden-antenna system is a Cobra exclu- sive. Now you own the world’s first and only full-range-power cordless tele- phone that conceals the handset and base antennas inside the phone and out of the way. No more traditional metal antennas to extend, bend or break. Cobra’s hidden antennas are perfectly matched to your phone’s microprocessor circuitry for optimum performance — and they offer the ultimate in user-friendly conve- nience.

LAST NUMBER REDIAL

Each time you dial, the phone number you’re calling is automatically saved in a special REDIAL memory. To call that number again — especially useful after receiving a busy signal — press and release the REDIAL button on the handset and the number will be automatically redialed.

OUT-OF-RANGE SIGNAL

If three beeps are heard immediately after the TALK switch is pressed, the hand- set is too far away from the base. The handset and TALK indicator will automat- ically turn off. Move closer to the recharging base and then try your call again.

POWER FAILURE RESET

After a power failure in your home (or any time you unplug your phone from AC power and then reconnect it), you must return the cordless handset to the base for about five seconds. This automatically resets the matching digital secu- rity codes and returns the channel selector to its start-up setting.

PULSE/TONE SWITCH

Your Cobra INTENNA cordless phone can be used with any phone system because it is switchable from pulse to tone dialing (see switch on rear of the base) depending on which service you are using. When using pulse dialing, mixed PULSE and TONE dialing may be used (to access certain long-distance or computerized banking services, for example) by selecting PULSE with the base switch and then using the ✱ button on the handset to temporarily switch to TONE dialing. Hanging up resets to PULSE.

RINGER SWITCH

This ON/OFF switch (located at the rear of the base) controls your cordless handset’s electronic ringer; no ring will sound in the OFF position.

SECUR-LOC®

This exclusive Cobra electronic circuitry is an added security measure to pro- tect your phone line from being accidentally accessed by a neighbor’s cordless phone. Secur-Loc activates automatically every time your cordless handset is placed into its base.

(6) (7)