CP9125manual(6.12) 10/20/98 11:38 AM Page 36

Operation

Operation

Ringer Switch

Note

When ringer switch is off you can detect an incoming call by the flashing IN USE LED on the handset or on the base.

Ringer Switch

OFF/ON switch (on base) controls the handset ringer.

When set on OFF, no ring will sound.

Handset Battery Recharging

When the handset battery needs recharging:

Handset Battery

Recharging

Note

Replacement batteries are available from Cobra. See Accessories section on page 44.

Tone/Pulse Tone/Pulse

The CP-9125 can be used either as tone or pulse, depending upon your phone service.

30

Low Baton handset will flash and 2 beeps will be heard every 30 seconds for 2 minutes. Return to base for recharging. Handset will shut off at the end of the 2 minute period, terminating a conver- sation if the handset is in TALK mode.

31

Page 18
Image 18
Cobra Electronics CP-9125 operating instructions Ringer Switch, Handset Battery Recharging, Tone/Pulse Tone/Pulse