Mode Functions
Operation
Set CTCSS Privacy Codes
•
Mode Button | To select a CTCSS privacy code: | |
| 1. After selecting a channel, press the | |
| Mode button until the CTCSS icon appears | |
| and the small numbers flash on the display | |
CTCSSPrivacyCode | (01 through 38). | |
| ||
| NOTE | |
| If DCS is turned on at the channel | |
| selected, the display will flash the | |
Channel Buttons | CTCSS icon and “OFF.” To switch from | |
DCS to CTCSS, press the Channel Up | ||
| ||
| or Channel Down button while the | |
| display is flashing “OFF.” The display | |
| will then show the small numbers | |
| flashing and you will then be able | |
| to proceed to step 2. |
2.Press using the Channel Up or Channel Down button to select a CTCSS privacy code. You can hold the Up or Down button for fast advance.
3.When your desired CTCSS privacy code is displayed, choose one of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock/Enter button to enter the new setting and return to Standby mode.
c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
Introduction | Operation | Customer Assistance Warranty |
|
Set DCS Privacy Codes | • | ||
|
|
| |
Mode Button | To select a DCS privacy code: |
| |
| 1. After selecting a channel, press the Mode |
| |
| button until the DCS icon appears and the |
| |
| small numbers flash on the display |
| |
DCS Privacy Code | (01 through 104). |
| |
|
|
| |
|
| NOTE |
|
|
| If CTCSS is turned on at the channel |
|
|
| selected, the display will flash the |
|
Channel Buttons |
| DCS icon and “OFF.” To switch from |
|
| CTCSS to DCS, press the Channel Up |
| |
|
|
| |
|
| or Channel Down button while the |
|
|
| display is flashing “OFF.” The display |
|
|
| will then show the small numbers |
|
|
| flashing and you will then be able |
|
|
| to proceed to step 2. |
|
2.Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance.
3.When your desired DCS privacy code is displayed, choose one of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock/Enter button to enter the new setting and return to Standby mode.
c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
|
|
|
|
10 | Nothing Comes Close to a Cobra® 11 | ||
