Mode Functions
Operation
VibrAlert® and Call Alert
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both.
Introduction | Operation | Customer Assistance Warranty |
Roger Beep Confirmation Tone
•
Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you
Mode Button
To change call settings:
VibrAlert® + Ring
are finished talking and it is OK for them to speak.
Channel Button
1.Press the Mode button until the Call Setting icon flashes on the display. The current setting (“01” vibrate + ring, “02” vibrate only or “03” ring only)
is displayed.
2.Press the Channel Up or Channel Down button to change the call setting.
3.Choose one of the following:
VibrAlert® Only
Ring Only
Mode Button
Roger Beep On
Channel Button
To turn roger beep on or off:
1. | Press the Mode button until the |
| Roger Beep icon flashes on the display. |
| The current on or off setting is displayed. |
2. | Press the Channel Up or Channel Down |
| button to select roger beep on or off. |
3. Choose one of the following: | |
| a. Press the Mode button to enter |
| the new setting and proceed to other |
| functions. |
| b. Press the Lock/Enter button to enter the |
a. Press the Mode button 
to enter the new setting 
and proceed to other functions.
b. Press the Lock/Enter button to enter the new setting and return to Standby mode.
10 Call Tone Settings
•
Mode Button | You can choose from 10 different call tone |
| settings to transmit a unique call alert. |
new setting and return to Standby mode. |
Keystroke Tones
•
With Keystroke Tones turned on, your radio will sound beeps each time you press a button or change a setting.
| To change a call tone setting: |
| 1. Press the Mode button until the |
| letter “C” and the current call tone number |
Call Tone Setting | (01 through 10) is displayed. |
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one of the following:
Channel Button | a. Press the Mode button to enter the new |
| setting and proceed to other functions. |
b. Press the Lock/Enter button to enter the new setting and return to Standby mode.
Mode Button
Keystroke Tones On
Channel Button
To change keystroke tones:
1.Press the Mode button until the Keystroke Tones icon flashes on the display. The current on or off setting is displayed.
2.Press the Channel Up or Channel Down button to turn keystroke tones on or off.
3.Choose one of the following:
a.Press the Mode button to enter the new setting and return to Standby mode.
b.Press the Lock/Enter button to enter the new setting and return to Standby mode.
24
25
