Cobra Electronics CXT225C owner manual Mode Functions

2. Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance.

3. When your desired DCS privacy code is displayed, choose one of the following:

a. Press the Mode/Power button to enter the new setting and proceed to other functions.

b. Press the Lock button to enter the new setting and return to Standby mode.

c. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

NOAA* All Hazards Radio Channels

•

You can use your microTALK radio to listen to NOAA All Hazards Radio channels transmitting in your area.

Mode Functions

Operation

Set DCS Privacy Codes

•

Mode/Lock Button To select a DCS privacy code:

Introduction Operation Customer Assistance Warranty

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,” automatically transmitting when you speak. You can set the

DCS PrivacyCode

1.After selecting a channel, press the Mode/Power button until the DCS icon appears and the small numbers flash on the display (01 through 83).

If CTCSS is turned on at the channel selected, the display will flash the DCS icon and “OFF.” To switch from CTCSS to DCS, press the Channel Up or Channel

VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Mode/Power	To turn VOX mode on or off:
	1. Press the Mode/Power button until the VOX
	icon flashes on the display. The current On or
	Off setting is displayed.

Channel Button

Down button while the display is flashing “OFF.” The display will then show the small numbers flashing and you will then be able to proceed to step 2.

VOX Icon

Channel Button

Mode/Power

2.Press the Channel Up or Channel Down button to turn VOX On or Off.

3.Choose one (1) of the following:

a.Press the Mode/Power button to enter the selected On or Off setting and proceed to other functions.

b.Press the Lock button to enter the selected On or Off setting and return to Standby mode.

To Set VOX Sensitivity:

1.Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed.

Mode/Power	To listen to All Hazards Radio channels:
	1.	Press the Mode button until the All Hazards
		Radio icon and the currently selected All Hazards
		Radio channel are displayed.
Hazards Radio Icon	2.	Use the Channel Up or Channel Down
		button to change All Hazards Radio channels.
	3.	The All Hazards Radio icon will continue to
		be displayed when All Hazards Radio is on.
Channel Buttons		Choose one of the following:
		a. Press Mode button to proceed to other functions.
		b. Press the Lock button to exit All Hazards Radio
		channel mode and return to Standby mode.

VOX Sensitivity Level	The current VOX sensitivity level is
	displayed with letters “LE” and a Number
	1 through 5, with Number 5 being the
	most sensitive level and Number 1
	being the least sensitive level.
Channel Button	2. Press the Channel Up or Channel Down
	button to change the setting.
	3. Choose one (1) of the following:
	a. Press the Mode/Power button to enter
	the selected setting and proceed to other
	functions.
	b. Press the Lock button to enter the selected
	setting and return to Standby mode.

8 English *National Oceanographic and Atmospheric Administration Nothing Comes Close to a Cobra® 9