Cobra Electronics CXT400C Mode/Lock Button To select a DCS privacy code, To other functions

Operation

Mode Functions

Introduction Operation Customer Assistance Warranty

Set DCS Privacy Codes

•

Mode/Lock Button To select a DCS privacy code:

3. The All Hazards Radio icon will continue to

be displayed when All Hazards Radio is on.

Choose one of the following:

DCS Privacy Code

Channel Buttons

1.After selecting a channel, press the Mode/Lock button until the DCS icon appears and the small numbers flash on the display

(01 through 83).

If CTCSS is turned on at the channel selected, the display will flash the DCS icon and “OFF.” To switch from CTCSS to DCS, press the Channel Up or Channel Down button while the display is flashing “OFF.” The display will then show the small numbers flashing and you will then be able to proceed to step 2.

Channel Buttons

Enter/Hi-Low Button

a. Press the Mode/Lock button to proceed

to other functions.

b. Press the Enter/Hi-Lowbutton to exit

All Hazards Radio channel mode and

return to Standby mode.

c. Press Talk button to exit and start on

last used transmitting channel.

*National Oceanographic and Atmospheric Administration

Voice Activated Transmit (VOX)

•

2.	Press using the Channel Up or Channel Down button to select a
	DCS privacy code. You can hold the Up or Down button for fast
	advance.
3.	When your desired DCS privacy code is displayed, choose one of
	the following:
	a. Press the Mode/Lock button to enter the new setting and
	proceed to other functions.
	b. Press the Enter/Hi•Low button to enter the new setting and

In VOX mode, your microTALK radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Mode/Lock Button To turn VOX mode on or off:

1. Press the Mode/Lock button until the VOX icon flashes on the display. The current on or off setting is displayed.

return to Standby mode.

c. Do not press any buttons for 15 seconds

to enter the new setting and return to Standby mode.

NOAA* All Hazards Radio Channels

•

You can use your microTALK radio to listen to NOAA All Hazards Radio channels transmitting in your area.

VOXIcon

2.	Press the Channel Up or Channel Down
	button to turn VOX on or off.
3.	Choose one of the following:
	a. Press the Mode/Lock button to enter the
	selected on or off setting and proceed to
	other functions.

Mode/Lock Button

To listen to All Hazards Radio channels:

1. Press the Mode/Lock button until the All Hazards Radio) icon, the currently selected All Hazards Radio channel, and signal strength are displayed.

2.Use the Channel Up or Channel Down

button to change All Hazards Radio channels.

b. Press the Enter/Hi•Low button to enter

the selected on or off setting and return

to Standby mode.

To set VOX sensitivity:

1.Press the Mode/Lock button until the VOX icon flashes and the current sensitivity level is displayed.

10 English Nothing Comes Close to a Cobra® 11