Using Your Radio
Operation
Channel Buttons | Channels | • |
|
|
With the radio on, select any of the
22 channels by pressing the Channel Up or Channel Down button.
Introduction | Operation | Customer Assistance Warranty |
|
Selectable High•Low Power Output | • | ||
|
|
| |
When in close proximity to another party or during favorable conditions, you can switch from High to Low Power to extend battery life.
Channel Number
Listening
Call Button
Both radios must be tuned to the same channel to communicate.
Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.
See page 26 for FRS/GMRS frequency allocations and compatibility charts.
Listening for a Response
•
Release the Talk button to receive incoming transmissions. Your microTALK radio is always in Standby mode while the Talk or
Call buttons are not pressed.
Call Button
•
To alert another person that you are calling:
–Press and release the Call button.
The other person will hear a two second call tone. This tone is used only to establish voice communications.
See page 24 on how to select from 10 available call tone settings.
Hi Power Icon
Low Power Icon
Light/Max Range
This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.
To toggle between high and low power:
–Press and release the Hi•Lo button.
When using Channels 1 through 7 and
15 through 22 on high power, the Hi icon will be visible on the display.
When using those channels on low power and on Channels 8 through 14, the Low icon will be visible on the display.
To Illuminate Display
•
Press and release the Light/Max Range button to illuminate the display for
10 seconds.
4 | 5 |
