Speaker/Microphone/Charge Jack

10289_LI5600DX_PH2 8/10/07 11:28 AM Page 6

Using Your Radio

Operation

Auto Squelch/Maximum Range

Your microTALK radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain and conditions. This slightly reduces the Maximum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

 

 

Your microTALK radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for the wall charger/adapter.

Range at which signals can be heard.

You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.

Light/Max Range

To briefly turn off auto squelch:

 

Press the Light/Max Range button

 

for less than five seconds.

If you hear two beeps, you have turned

the maximum range extender on (see below).

To turn maximum range extender on:

Speaker/Microphone/ Charge Jack

To attach a speaker/microphone:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

Press and hold the Light/Max Range button for at least five seconds until you hear

two beeps which indicates the maximum range extender is on.

To turn maximum range extender off:

Press and release the Light/Max Range button or change channels.

Lock Feature

The Lock feature locks the Channel, Mode, Hi•Lo and Power buttons to prevent accidental operation.

Signal Strength

Signal Strength Meter

 

Your microTALK radio has a Signal Strength

 

 

 

Meter that shows the strength of your incoming

 

 

and outgoing transmissions. The ascending bars

 

next to the signal strength indicate the strength

 

 

of the signal. The greater the number of bars

 

 

visible, the stronger the signal. The fewer

 

 

number of bars visible, the weaker the signal.

 

microTALK Range

Your range will vary depending on terrain and conditions.

Lock/Enter Button

Lock Mode

To turn the lock feature on or off:

Press and hold the Lock/Enter button for two seconds.

A double beep sound is used to confirm your lock on or off request. When in Lock mode, the Lock icon will be displayed.

Maximum Range

Reduced Range

Reduced Range

In flat, open country your radio will operate at maximum range.

Buildings and foliage in the path of the signal can reduce the range of the radio.

Dense foliage and hilly terrain will further reduce the range of the radio.

On FRS channels 8 through 14, your radio automatically switches to low power, which will limit the range the radio can communicate.

Remember, you can achieve maximum range by using maximum range extender. See page 6 for details.

6

Nothing Comes Close to a Cobra® 7

Page 6
Image 6
Cobra Electronics LI 5600DX owner manual Auto Squelch/Maximum Range, Lock Feature, Signal Strength Meter, MicroTALK Range