Cobra Electronics MF 2500 How can I set optimal operating parameters, What are preset modes?

Frequently Asked Questions

Reconnect the cables to the PCB.

Push the panel towards the case (be sure to have well positioned the rubber gasket). Close the MF 2500 Fish Finder box screwing the four screws.

4.2How can I set optimal operating parameters.

Optimal operating parameters can be set accordingly with the intended use of the Fish Finder. To quickly set get optimal operational parameters for fishing it is possible to select the FISH preset from the Fish Finder Setup menu, while for cruising it is possible to select the CRUISE preset.

4.3What are preset modes?

Preset modes are pre-defined settings of the Fish Finder operating parameters. There are five preset. You can use them to quickly set the Fish Finder in the most commonly used operating modes. These are:

CRUISE: sets the Fish Finder in full auto mode with the sensitivity settings (GAIN OFFSET, NOISE level and STC) optimized for displaying at best the bottom.

FISH: sets the Fish Finder in full auto mode with the sensitivity setting optimized for target searching.

AUTORANGE: sets the autorange mode and the manual gain mode.

BOTTOM LOCK: sets the range mode to bottom lock and the manual gain mode.

MANUAL: sets the range mode and the gain mode to manual.

Nothing Comes Close to a Cobra® 17